- Nine Road Glide and Street Glide variants from model year 2026 are affected, built between October 2025 and August 2026.
- The cause is plastic residue on the gear position sensor; dealers replace the part free of charge.
- Harley-Davidson expects roughly one in every thousand motorcycles to actually have the fault.
The “N” on the display is one of those indicators riders rely on blindly when stopping at traffic lights or manoeuvring. That is exactly where the problem lies that has now prompted Harley-Davidson to issue a voluntary recall in the USA. On certain Road Glide and Street Glide models from the current model year, the Harley-Davidson gear position sensor can deliver a false signal. The cockpit then shows neutral while a gear is still engaged in the transmission. With the US road safety authority NHTSA, the campaign runs under number 26V730, while Harley-Davidson lists it internally as recall 0194. Because eight of the nine models are also sold in Germany, the issue is just as relevant for riders there.

What happens if the Harley’s gear position sensor reports incorrectly?
In the worst case, the motorcycle starts moving unintentionally as soon as the rider releases the clutch with the engine running. The rider believes the bike is in neutral, but the V-twin is in fact sending power to the rear wheel.
The gear position sensor detects which gear is currently engaged and passes this information on to the engine control unit. The control unit in turn feeds the gear indicator in the cockpit. If the signal at the start of this chain is wrong, the display shows the wrong information too. The result is an unintended lurch forward which, according to the manufacturer, increases the risk of injury. In most cases the engine is likely to stall afterwards, but the brief jolt can still lead to unsafe situations. As of the report dated 3 November 2026, the manufacturer is aware of two injuries that may be related to the fault. There is no recommendation to leave the motorcycles parked until they are repaired.
Why does the sensor deliver a false signal?
The culprit is a manufacturing defect at the supplier. During injection moulding of the sensor housing, excess plastic can remain stuck to the component. This so-called flash can distort the sensor’s signal. The part, number 32700166, is made by SSI Technologies of Janesville in the US state of Wisconsin.
The fault was first noticed on 16 April 2026, when a model year 2026 Road Glide was in the workshop for servicing. After that, it took a good six months to reach a decision. From May to early October, Harley-Davidson had suspect sensors held back and specifically examined for plastic residue and damaged spring clips. Since 3 August 2026, the plant in York, Pennsylvania, has been carrying out an additional check on the sensors before installation, which is why the affected production period ends on that day. On 27 October, the manufacturer’s responsible decision-making committee approved the voluntary recall, and one week later the report went to the NHTSA.

Which Harley-Davidson models are affected by the recall?
In the USA, the recall covers 21,643 motorcycles from nine touring models of model year 2026, including four CVO versions. Adding up the variants, the Road Glide family accounts for the larger share with 12,496 motorcycles. The Street Glide family accounts for 9,147 units.
Road Glide and its derivatives
- Road Glide (FLTRX): 7,794 motorcycles, built from 22 October 2025 to 3 August 2026
- Road Glide Limited (FLTRXL): 3,013 motorcycles, built from 23 October 2025 to 29 July 2026
- CVO Road Glide ST (FLTRXSTSE): 1,360 motorcycles, built from 30 October 2025 to 30 July 2026
- Road Glide Police (FLTRXP): 329 motorcycles, built from 23 October 2025 to 29 July 2026
Street Glide and its derivatives
- Street Glide (FLHX): 5,459 motorcycles, built from 22 October 2025 to 3 August 2026
- Street Glide Limited (FLHXL): 2,195 motorcycles, built from 27 October 2025 to 30 July 2026
- CVO Street Glide Limited (FLHXLSE): 677 motorcycles, built from 3 December 2025 to 30 July 2026
- CVO Street Glide ST (FLHXSTSE): 598 motorcycles, built from 30 October 2025 to 30 July 2026
- CVO Street Glide (FLHXSE): 218 motorcycles, built from 27 October 2025 to 25 July 2026
With an expected failure rate of 0.1 percent, around 22 of these motorcycles would statistically have a faulty sensor. Because it is impossible to say in advance which ones they are, Harley-Davidson is replacing the part on all of them. Outside the USA, a number of Road Glide, Street Glide and Street Glide Ultra models from model year 2025 are also affected in Brazil.
Does the Harley-Davidson recall also apply in Germany?
So far there is no official recall via the German Federal Motor Transport Authority (KBA), and no figure for Germany has been published yet. Nevertheless, owners can already check whether their motorcycle is affected.
The Harley-Davidson recall lookup has listed campaign 0194 since 6 November 2026 and also recognises motorcycles registered in Germany. According to a report by Motorrad & Reisen, Harley-Davidson has also instructed its worldwide dealer network to continue selling affected motorcycles, but to hand them over to customers only after the sensor has been replaced. With the exception of the police version, all affected models are also available on the German market.
Whether a particular motorcycle is included cannot be determined from the model or year of manufacture alone, because each model has its own production window. The vehicle identification number is what counts. It is listed in field E of the German registration certificate Part I and is also stamped on the steering head. With this number, the status can be checked via the Harley-Davidson online lookup or directly with an authorised dealer.

How can riders recognise a faulty gear sensor?
The most important warning sign is an erratic gear indicator. If it jumps back and forth between “N” and another gear, or shows neutral while riding, the sensor is suspect.
Anyone who notices something like this should not wait for a letter from the manufacturer, but have the Harley checked at a workshop straight away. Until the recall is officially running in Germany as well, it makes sense for owners of the affected models to check neutral once more than usual before releasing the clutch and not to rely solely on the “N” on the display.
What does the repair cost and how does the replacement work?
The replacement is free of charge for owners; authorised dealers swap the gear position sensor for a new part. The replacement part comes from a new tool that should no longer produce any plastic residue.
In retail, the sensor with part number 32700166 costs around 108 euros (approx. 118 US dollars). Dealers in the USA were informed between 6 and 13 November 2026. Letters to owners and the repair kits are being sent out there between 16 and 23 November 2026.
How many recalls has Harley-Davidson had in 2026 so far?
With campaign 0194, Harley-Davidson has already reported four recalls to the NHTSA this year. Together they affect around 136,000 motorcycles in the USA.
In February, 9,401 motorcycles were affected because the upper triple clamp can break. In mid-April, 16,994 motorcycles followed because the rear brake can fail. Just two weeks later came by far the largest case: 88,039 motorcycles in which pressure can build up in the crankcase and oil can leak. With its 21,643 motorcycles, the new sensor recall accounts for just under 16 percent of this year’s total, making it the second-largest of the year.
Frequently Asked Questions
-
Which Harleys are affected by the gear position sensor recall?
Nine touring models from model year 2026 are affected: Road Glide, Road Glide Limited, Road Glide Police, Street Glide and Street Glide Limited, plus the CVO Road Glide ST, CVO Street Glide, CVO Street Glide Limited and CVO Street Glide ST. They were built between 22 October 2025 and 3 August 2026, each model within its own production window.
-
Does the Harley-Davidson gear position sensor recall also apply in Germany?
There is no official recall with the German Federal Motor Transport Authority (KBA) yet. However, the Harley-Davidson recall lookup already recognises motorcycles registered in Germany, and the check is done using the vehicle identification number.
-
Can an affected Harley still be ridden until it is repaired?
Yes, there is no recommendation to park the motorcycle until the part is replaced. Before releasing the clutch, however, riders should check that neutral is really engaged. If the gear indicator flickers, an early visit to the workshop makes sense.
-
How much does it cost to replace the gear position sensor?
For affected owners, the replacement at an authorised dealer is free of charge. As a spare part, the sensor costs around 108 euros (approx. 118 US dollars).








